7100 series

Introduction

7100 series with UL listed 3 Hour Fire Rated, UL10C

 

 

 

 

ANSI Grade 1 156.3

 

Rim type , Vertical Rod Type, Less Bottom Type, Alarm Type

Lever Trim, Knob Trim, Handle Set available

Download

 Specification:

 

Material Push bar –Steel pressed or stainless steel pressed
Head Cover – Steel pressed or stainless steel pressed
Spring – Stainless steel
Latch Bolt 5/8’ throw, stainless steel
Dead Latch Bolt 9/16”, steel
Strike For 5/8” stop
Projection 2-1/2” maximum, 1-7/8” pressed
Reversible Non-handed, reversible for all functions and trims
For Door 1-3/4” thick of wood or metal door. Specify thickness if other than 1-3/4”
Door Width 3’ standard for door width of 2’-8” to 3’-0”;4’ standard for door width of 3’-8” to 4’-0”
Stile 4-1/4” minimum
Mounting Height 40-5/16” from CL to finished floor recommended
Mounting Furnished standard with sheet metal & machine screws or SNB as option
Cylinders For trim, knob, lever & thumb-piece type “Schlage C” key way
Dogging 1/4 turn, hex key dogging on non-fire labeled device
UL Listed For “Panic Hardware” and “UL”. Labeled (3 hours) fire exit hardware
Ansi Standard A156.3 Grade 1
Operation Inside by slight pressure on any point of the push bar all time
Head Cover Big 8-1/2”x2-3/4”x2-1/2”(216mmx68.3mmx62mm) &
Small 6-1/3”x2-3/4”x2-1/2”(160mmx68.2mmx60mm)
Standard Finishes US26, US26D, US32D (or other finishes upon request & discussion)